Dinghy Wire Jib Halyards
For simplicity we can make any dinghy jib halyards , more often than not a custom length is required.
We make all our jib halyards to order and can generally despatch within 1-2 days.
We use marine grade stainless steel wire - 3mm Dia - 7 x 19 this is the most flixible available.
Blue wave thimbles.
Custom Jib Halyards come as standard with a 4.5m x 4mm Tail.
We suply with 1 x Hard Eye and 1 x soft loop generally 20cm long.
You can order on line as we price all our Jib Halyards up to 6m at the same price of £33.99.
This is Inclusive of UK Mainland Delivery
To Order ;
Go to custom Jib Halyards.
Order your Jib Halyard on Line for an all inclusive cost of £33.95
When you have placed the order just e mail us with;
The Length Required. This is the Bearing Surface - From the inside of the Hard Eye to the inside of the Soft Loop, (It is a good idea to keep these measurements on file for future reference)
Boat Class
Any Special requirements you can call us on 07850660225 and order by phone if you prefere.
Custom Wire Jib Halyard 3mm Stainless Steel Wire.
£33.95
Leader Jib Halyard
£33.95
National Redwing Wire Jib Halyard
£33.95
Topaz Omega Wire Jib Halyard - Custom Length
£33.95